NIKWAX SolarProof®
Tent & Gear SolarProof®
For waterproofing and UV protection
The only waterproofer designed to protect against UV damage and enhance water repellency of all weatherproof textiles. Easy to apply by hand, non flammable, PFAS and aerosol free.
OVERVIEW
For waterproofing and UV protection.
Easy to use spray-on waterproofing and UV blocker for all synthetic tents, packs, and outdoor covers.
Adds water repellency, increases fabric strength and protects against UV deterioration.
Enhances the performance of your tent and gear and doubles their useful life
Recommended for all synthetic tents and gear.
Specialty water proofer designed to protect against UV damage and enhance water repellency of all weatherproof textiles. Easy to apply by hand, non flammable, PFAS and aerosol free.
Why exposure to UV can compromise synthetic materials...
Synthetic fabrics used for our bags are coated with a water repellent treatment. Exposure to ultraviolet (UV) light both destroys the water repellency over time and leads to a reduction in fabric tear strength, significantly shortening the lifespan of equipment.
The application of Nikwax Tent & Gear SolarProof® can double the effective life of equipment by protecting against UV damage, while also providing Durable Water Repellency (DWR) to keep the rain out.
Nylon fabrics are strong, but vulnerable…
Red Oxx bags are made from synthetic fabrics, such as CORDURA 1000 denier Nylon and 1050 Ballistic Nylon, with a thin watertight polyurethane coating on the inside and a Durable Water Repellent (DWR) coating on the outside. This combination gives great strength and water resistance; ideal attributes for outdoor equipment.
Unfortunately these fabrics are vulnerable to sunlight and in just a few months of continuous exposure, can lose up to half of their strength. Additionally, the inner coating will degrade if it is left damp for long periods.
Nikwax Tent & Gear SolarProof® protects the entire fabric, from the effects of both UV and water.
DIRECTIONS
Apply Nikwax Tent & Gear SolarProof® by hand…
For best results always clean item(s) first with Nikwax Tent & Gear SolarWash. No need to dry item(s) before waterproofing.
Protect working surface and lay clean wet item flat, or erect tent and wet.
Spray evenly to outside of fabric.
Wait for 2 minutes. Remove any surplus product with a damp cloth.
Check carefully to ensure no areas have been missed.
Use approximately – 1.5fl oz (50ml) of product for 10 square ft (1m2).
The coverage is approximate and depends on the condition of the fabric being treated.
To maintain waterproofing and UV protection always clean with Nikwax Tent & Gear SolarWash®. Do not use conventional detergents.
Nikwax Tent & Gear SolarProof® treated equipment needs no heat to develop Durable Water Repellency (DWR)…
DWR and ultraviolet (UV) protection will develop once the fabric is dry. Allow item(s) to dry fully before packing away.
